This main objective of this project is to use Infrared frequency signal to control (on/off) the Home Appliances. This Project is REMOTE CONTROLLED SWITCH BOARD, which is used to switch on/off the Home Appliances by using a standard Remote control. The system is used to switch on/off up to six electrical devices. All the above processes are controlled by the 8 bit Microcontroller AT89S52. The Microcontroller receives the Infrared Signal from the receiver and it decodes and switch on/off the appropriate \Device. The Range of the system is unto 10 meters. The project can switch on/off electrical devices of maximum load current of 5Amperes. High power loads can also be connected by changing the Relay and the devices will come to the original state after the power failure. The Microcontroller is used receive the Infrared signal from the Transmitter, the received signal is processed by the Microcontroller and according to the signal the corresponding device is switched On/off.
Brand: HBeonLabs, Product assembled by: HBeonLabs
Controlling home appliances through ir remote.